Technical Specifications of IOT EVALUATION BOARD

Board Specifications:-

• Board is driven using either Raspberry Pi 3 B+ or Arduino UNO R3 controller.
• Facilitates MQTT or HTTP application protocol connection to various IoT cloud platforms such as ThingSpeak, AWS IoT, Microsoft Azure, IBM Bluemix, etc.
• Can be connected to a Private Cloud including Xtrans Cloud.
• On board voltage regulator for generating 3.3V from +5V input through power adapter.
• On board Wi-Fi connectivity through ESP8266 for Arduino and internal Wi-Fi connectivity for Raspberry Pi.
• On board digital and analog sensors like Temperature and Humidity, Gas sensor, Light sensor, Ultrasonic distance sensor and Soil moisture sensor.
• On board ADC MCP3008 for Raspberry Pi to connect analog sensors and internal ADC for Arduino.
• On board 16x2 character LCD.
• On board 4x4 keypad matrixes.
• On board 32.768 kHz quartz crystal RTC DS1307 powered by coin cell battery of 3V.
• 4 LEDs and 4 Switches.
• 2-digit 7 segment display.
• On board stepper motor driver to drive 5V stepper motor.
• One Buzzer.
• Connector slot for external Bluetooth module for Arduino.
• Provided extra connectors for connecting external analog and digital sensors.
• I2C, SPI communication protocols.
• On board UART connector.
• UART Software serial communication.
• Several outputs of the on-board controller can be accomplished through events from cloud such as turning on LED’s or sending a test message etc.
• Outputs can be programmed to be event or threshold driven.
• Performance of IoT experiments and design / implementation of student projects possible including provision to write their own programs.

Controller Specification:-

The IoT Development kit has either Arduino UNO R3 or Raspberry pi 3 controllers.

Arduino UNO R3:

• Microcontroller: ATmega328.
• Operating Voltage: 5V.
• Input Voltage limit: 5-12V.
• Digital I/O Pins: 14 (of which 6 provide PWM output).
• Analog Input Pins: 6.
• DC Current per I/O Pin: 40 mA.
• DC Current for 3.3V Pin: 50 mA.
• Flash Memory: 32 KB of which 0.5 KB used by bootloader.
• SRAM: 2 KB (ATmega328).
• EEPROM: 1 KB (ATmega328).
• Clock Speed: 16 MHz.

Raspberry Pi 3:

• Quad Core 1.2GHz Broadcom BCM2837 64bit CPU.
• 1GB RAM.
• BCM43438 wireless LAN and Bluetooth Low Energy (BLE) on board.
• 10/100 Base Ethernet.
• 40-pin extended GPIO.
• 4 USB 2 ports.
• 4 Pole stereo output and composite video port.
• Full size HDMI.
• CSI camera port for connecting a Raspberry Pi camera.
• DSI display port for connecting a Raspberry Pi touchscreen display.
• Micro SD port for loading your operating system and storing data.
• Upgraded switched Micro USB power source up to 2.5A.

---

ALS-XT-IoT-PRJBRD-AUR-01

Specifications:-

• Facilitates MQTT or HTTP application protocol connection to various IOT cloud platforms such as thingspeak , AWS IoT, Microsoft Azure And IBM Bluemix.
• voltage regulator for generating 3.3V from +5V input Through adaptor.
• Interface circuit for WiFi connectivity through ESP8266EX module.
• Interface circuit for LDR (light sensor) and LM35 (temperature sensor).
• Interface circuit for SSD1306 I2C OLED (128x64 pixels).
• 16x2 alphanumeric display (LCD) with back lighting.
• Two nos of general purpose LEDs and one power on LED.
• Two nos of general purpose push button switches.
• Interface circuit for Buzzer.
• 2 SPST relays with 5V to drive external devices upto AC 250V 12A.
• RS3232 Serial interface through on chip UART and 9 pin D-sub connector.
• stepper motor interface with direction and speed control.
• Interface circuit for Zigbee S2C (XB24CZ7WIT-004).
• Interface circuit for Bluetooth (HM-10).
• 19 Programmable I/o lines.
• Power supply adapter 5VDC,2A.
• Several of the outputs to the on-board controller can be Accomplished through events from cloud such as turning on LEDs Or sending a text message to the display is possible.
• Performance of experiments and design/implementation of Student projects possible including provision to write their own programs.

---

ALS-XT-IoT-PRJBRD-RBPi-01

Specifications:-

• Facilitates MQTT or HTTP application protocol connection to various IOT cloud platforms such as thingspeak , AWS IoT, Microsoft Azure And IBM Bluemix.
• voltage regulator for generating 3.3V from +5V input Through adaptor.
• Internal WiFi connectivity for Raspberry pi 3 b+.
• Interface circuit for LDR (light sensor) and LM35 (temperature sensor).
• Interface circuit for SPI ADC MCP3008 with 8 channels.
• Interface circuit for SSD1306 I2C OLED (128x64 pixels).
• 16x2 alphanumeric display (LCD) with back lighting.
• Two nos of general purpose LEDs and one power on LED.
• Two nos of general purpose push button switches.
• Interface circuit for Buzzer.
• 2 SPST relays with 5V to drive external devices upto AC 250V 12A.
• RS3232 Serial interface through on chip UART and 9 pin D-sub connector.
• Stepper motor interface with direction and speed control.
• Interface circuit for Zigbee S2C (XB24CZ7WIT-004).
• Power supply adapter 5VDC,2A.
• 26 Programmable I/o lines.
• Several of the outputs to the on-board controller can be Accomplished through events from cloud such as turning on LEDs Or sending a text message to the display is possible.
• Performance of experiments and design/implementation of Student projects possible including provision to write their own programs.

---